No Baseline Established

A baseline must be established immediately after device calibration to enable anomaly detection.

IQM Decoherence Snapshot

staleBest qubit — (T₂* ≈ — · T₂echo ≈ —)
Waiting for first refresh
Measurement timestamp unavailable
Monitoring Q0

Runtime Calibration

Not CalibratedstaleCollect ≥10 timing samples to enable calibrated runtime estimation
Calibration required before collapse
IQM cacheNever fetchedMeasurement time unavailable

Using Fallback Estimates

Current accuracy: ±20-30% error range

Samples Collected0 / 10

Need 10 more samples to enable calibration

Default is 10. Lower the threshold if you need to use partial sample collections.

Preset Library
Select calibration presets to run multi-sweep calibration
0 presets available
0 selected

No presets found in this category

Sample History
Loading calibration samples...
Loading calibration samples…
Show:

Clear All Samples

Delete all calibration samples for iqm_garnet_mock. The calibration record will be preserved.

Clear Calibration + Samples

Delete the calibration record AND all samples for iqm_garnet_mock. This removes all calibration data.

Or use default rotation
Sweep Configuration
Configure parameters for the Ramsey wait-time sweep
Q0 ×

Single-qubit measurement

Runs both protocols to distinguish noise sources (low-freq vs high-freq)

Limited to 20.0 μs per IQM recommended window.

Recommended IQM sweep window is 0.1–20 μs. Values beyond 20 μs provide no signal but still bill runtime.

Minimum: 4096, Recommended: 8192+

Default: 2.0 MHz (phase rotation frequency)

Estimated Runtime

~4-9 minutes

75 points

8192 shots/point

≈614k total shots